Sunday 2 June 2013

Sunday, June 02, 2013
60

This is fully Bugless and has no issue so far.

Here are some screenshots:










Installation and Instructions:

Note: I am not responsible if you done anything wrong or bricked your device while flashing this rom. So, flash at your own risk.
Requirements:
1: You need a rooted Noir A10.
2: You must have CWM Recovery installed.

Installation Procedure:
1: Download the Flashable Zip file from here and copy it to sd-card without extracting it.
2: Boot into recovery mode by Powering off the device. Then press Volume UP + Volume Down + Power Key at the same time.
3: There will be a screen with 
            Recovery Mode: Volume Up
            Factory Mode: Volume Down
You would press Volume Up again for getting into CWM Recovery.
4: Now navigate to -wipe data/factory reset. Select it by using power button.
5: Now navigate to Yes -- Delete all user data and select it.
6: Now navigate to -wipe cache partition and select it and again select Yes..
7: Now navigate to -advanced and then to -wipe dalvik cache and select Yes.
8: Now navigate to -mounts and storage.
9: Now select -format /system and select Yes.
10: Now navigate to -install zip from sdcard
11: Now select -choose zip from sdcard
12: Navigate to where you copied the .zip file and then select it and select Yes.
13: Wait till installation is complete.
14: Then, Go back and select -reboot system now.
15: There you are with Stock JB on Noir A10.
Note: First Boot-up will take some time to configure. Then you are good to go.



Next Post will be LeWa JB for A10 Fully Bugless. Please feel free to comment about any problem you face.

60 comments:

  1. Assalamoalaikom

    Bro After we Install this so can we unroot
    it then?? Does it has any fault like the last unoficial jelly bean???
    And bro one more thing that My friend purchased Noir A10 2 days ago and
    when I saw that one had compass working but I purchased mine A10 on
    January and mine is tooooooooooooooooooooo slow even I hardly reset it
    actually Qmobile's service center reinstalled its rom tooo and also on
    compass it says NO MAGNATIC DEVICE DETECTED and it's free ram space is
    40 mb always even on hard reset too but on my friends A10 that;s free
    ram was 250 mb something. Hope you understood and Answer meThanks is Advance

    ReplyDelete
  2. W.Salam


    1: After you install this pre-rooted ROM, there is no way of un-rooting except flashing an un-rooted rom.
    2: It has no fault up till now.
    3: As for your ram consumption problem, you must have installed too many un-necessary apps that keep running in background and consume RAM and battery, both.

    ReplyDelete
  3. W-Salam


    1: After installing this pre-rooted ROM, you won't be able to un-root. For un-rooted JB ROM, you will have to flash un-rooted rom.
    2: No It has no faults known so far.
    3: As for slow device, you must have installed too many un-necessary apps that consume and battery both by running in the background.

    ReplyDelete
  4. It's okay I want without root and also can you tell me the rooting procedure of this one you are talking that is dangerous. Thanks
    Which one you prefer should I install JMP JB or Stock JB? and when the jelly bean update from Qmobile will come to A10 Thanks

    ReplyDelete
  5. Rooting is to be done by SP Flash tools but before that you must have un-rooted ROM.
    2: JMP and Stock Both are perfect but JMP has more features than that of Stock... So decision is yours.
    3: JMP is a person in India who made ROM for Micromax A110. Jiggar M. Pattani is his name.

    ReplyDelete
  6. Thanks for Reply
    Is there anyway to backup the unrooted stock rom??

    If I restore the rooted stock rom then can I unroot that?
    If you can provide me unrooted stock JB rom then please.

    ReplyDelete
  7. 1: No, there is no way to backup un-rooted rom.
    2: That depends on whether you install ICS or JB, I think if u flash stock ICS, there may be a chance of un-rooting but with JB, no way.
    3: If u flash this ROM, boot logo or boot animation won't change to micromax only if u already have Qmobile boot logo and information.
    4: If u are going to Flash JMP, don't worry just follow the procedure to the line, and you won't be having any problems... And YES this ROM is tested by me myself..
    5: So don't worry to flash cause if u face any problem I am here to help.

    ReplyDelete
  8. Thanks brother I recently rooted my device but with mobile uncle tools when I flash cwm recovery then it reboots to recovery mode but doesn't installs the cwm recovery.
    Suppose I rooted my A10 and Installed CWM Recovery then can I unroot the stock Rom with CWM recovery installed to backup the stock unrooted rom???

    ReplyDelete
  9. 1: Try it this way, power off the device and then keep pressing all three buttons (Vol UP + Vol DOWN + Power) untill a screen appears with Recovery Mode on Number 1. Then just press Vol UP to get into CWM.
    2: I haven't experimented that yet let me do some experiment..


    Kindly if u got skype id add me for further assistance
    Skype Name: alijee21

    ReplyDelete
  10. I did it but it goes to the stock recovery mode actually by mobile uncle tools is not flashing cwm recovery.

    When I select the latest one which you uploaded on this link http://www.androidspakistan.com/2013/06/cwm-recovery-new-version-6028-noir-a10.html#.UbSpFNjoyza

    then it ask me to restart and go to recovery mode to install from there but when i ok that then it restarts and goes to stock recovery again. I will ad you

    ReplyDelete
  11. I will ad you to skype

    bro actually when I select this cwm recovery www.androidspakistan.com/2013/06/qmobile-noir-a10-stock-jellybean-pre.html#.UbS_p9joyzb
    to flash it by Mobile uncle tools then it asks me to reboot to recovery to install from there but then it goes back to stock recovery mode I don't know why?? Actually Mobile uncle tools is not be able to flash cwm recovery. And I did the same as you told on last comment but not succeed Thanks

    ReplyDelete
  12. I will ad you to skype
    bro actually when I select this cwm
    recovery the one you uploaded latest to flash it by Mobile uncle tools then it asks me to reboot to recovery to install from there but then it goes back to stock recovery mode I don't know why?? Actually Mobile uncle tools is not be able to flash cwm recovery. And I did the same as you told on last comment but not succeed
    Thanks

    ReplyDelete
  13. AoA,
    i have 2 questions before installing:
    1. Are both Sims working in this rom?? (in some roms sim no. 2 not works)
    2. What's the maximum battery time?

    ReplyDelete
  14. Dear Brother, I followed the instructions in the post and successfully installed jelly bean. every thing else is fine except wifi signals, they keep dropping. Can you please suggest a fix / solution.

    ReplyDelete
  15. The download Link is dead, Hafiz Usama Amjad Please upload to some other place .

    ReplyDelete
  16. Be patient, re-uploading to different Site.

    ReplyDelete
  17. http://d-h.st/bBH
    Here you go. Download link has been updated in the post. Download it and install it. Give Feed back.

    ReplyDelete
  18. d-h . st/bBH

    (Remove space before and after dot "." in the link to make it work)



    Here you go. Link has also been updated in the post. Do give feedback.

    ReplyDelete
  19. Thanks Ali , I am downloading it right away. Just curious do you happen to have a copy of stock ICS ROM ( pre-rooted or unrooted both are ok ) of qa8 ( preferably the one flashable with sp tool. it was there online for quite sometime but can`t find it anymore.

    ReplyDelete
  20. I will try my best to provide you with A8 ICS Stock and method to install Stock Recovery and un-root. Just like Factory Pack.

    ReplyDelete
  21. Thank you Ali , I appreciate it.

    ReplyDelete
  22. My battery is not charging when phone is turned off. i am using this rom right now.

    ReplyDelete
  23. Pleasure is mine! Anything else I could do for you?

    ReplyDelete
  24. www . labandroid . com/qmobile/noir-a8/2012/12/noir-a8-stock-rom-prerooted/

    Just download and Install Stock ICS from link given above (Procedure is also included in the link)

    After installing the ROM, You have to install Stock Recovery and Un-Root the device.

    1: Download the Stock Recovery From the link and rename it to "recovery.img" (without Quotes).

    Recovery Link : d-h . st/dm6

    2: Place it to root of Sd-card and install MobileUncle MTK Tools from the Play Store.

    3: Install the recovery.img by going to MobileUncle App and selecting Recovery Update and then selecting the recovery.img file on the very top.

    4: It will ask your confirmation. Confirm it. If installing it first time does not work, try it again. It will work! (Remember you must have root to do all this)

    Now to Un-root,

    1: Just open SuperSU app and click Settings.

    2: Scroll down and in the section "CLEANUP" select "Full unroot".

    3: It will un-root the device and just reboot it once, your device will be un-rooted with Stock Recovery installed on it.

    ReplyDelete
  25. Thank you so much Ali, for taking so much pains and spending your time to look for this ROM for me. Can you find the one which is pre rooted and can be flashed with SP Flash tool ?

    One small feedback about your JMP rom , everytime I open settings it crashes after a little while .

    ReplyDelete
  26. I haven't much experience in Flashing with SP Flash Tools.


    What is the reason that you want to flash ROM with SP Flash tool??
    CWM flashing is quite good. Tell me your reason to flash through SPFT.


    As for JMP, are you using on A8 or A10. A8's Developer is Saad Usmani. Ask him around. As for A10, I don't remeber any crashes. For your information, I don't own A10 anymore. I have A20 now. So answering for problems in ROMs (made for A10 or A8) would be difficult as I don't own any of them except A20.

    ReplyDelete
  27. Thanks for the tips Ali , I want ICS stock ROM for A 8 SP Flashable because the new A8 come with JB ROM and it has been like chewing steel nails to root it , the stock ROM with JB coming on new phones is impossible to root , all the methods I tried given online failed so I plan to flash it with stock ICS ROM through SP tool ( CWM ICS rom can not be flashed till the fone is rooted ) and once I have ICS ROM I can easily root it and install CWM on it as well . Kind of long route to solve the issue.
    As far as the JMP issue, I am using it on A10 and that minor crash is not of any big concern. I own A8,A10 & A20 , I will check your A20 ROMS as well Insha allah

    ReplyDelete
  28. I would try my best to make a backup to be flashed through SP Flash tool. But I don't know the procedure of using SPFT. Anyways you'll have your backup files. Uploading them would be a problem. They are quite big in size.

    ReplyDelete
  29. throw them into your dropbox i will leech them

    ReplyDelete
  30. hey bro for qmobile a10 which method i will choose i cant understand for jellybean !

    ReplyDelete
  31. it doesnot work mobileuncle say root required!

    ReplyDelete
  32. You should try Framaroot app to root and add su binaries and install supersu app.

    Here is the link

    http://d-h . st/edT



    After installing the app, Just click on Install SuperSU and then on Boromir.... If it shows success, then just reboot. If it force closes at first, don't worry open app again, then click on Boromir.

    ReplyDelete
  33. Thank you Ali for the tip , I will try it as well. I have some good news , I finally not only dug out the SP Flashable Stock ICS ROM for Q Mobile A8 from my computer`s treasure load but also discovered the alternate method (non root to recovery method ) to root both A10 & A8 with JB , have all the files too. One minor glitch I am unable to fix is since I was running stock ROM rom Micromax A110 on my A10 so whenever i turn on fone it shows logo for canvas 2 for a moment then shows the rest of q mobile noir logo . how to get rid of MMX Canvas 2 logo?
    Regards,

    ReplyDelete
  34. In the ROM (Micromax A110's ROM that you have flased) There will be a file "logo.bin", in the the root directory, send it to me, I'll return your QMobile Logo back to you...

    ReplyDelete
  35. Sure Ali , I will upload them to 4share and put a link here. im in the middle of fixing both my A10 and my windows 8 which crashed last night , thanks to my dual boot arch linux that I could still use my lappy. I am afraid I wont be able to send you MMX A110 logo.bin file since now Im on your Stock JB ROM. I am looking for this file in my current ROM , may be I can replace/place it if I can find one on google

    ReplyDelete
  36. No you just have to pull it out from the zip file that you downloaded to be flashed.

    ReplyDelete
  37. Here you go Ali

    http://d-h.st/axj

    ReplyDelete
  38. http://d-h . st/1g4



    Just flash it with CWM, without wiping anything. Just install this zip and reboot

    ReplyDelete
  39. Thanks alot Ali , worked like a charm .Just noticed some new files on your De-Host page , all look interesting so I am leeching them as well , my laptop is loaded with all kind of files and you never know which one might be handy anytime :)

    ReplyDelete
  40. Ali, what do you say about this link? do you think is it really JB 4.1.2 or only 4.1.1?

    http://www.androidrooting.com/get-jelly-bean-4-1-2-for-micromax-a110-canvas-2/

    ReplyDelete
  41. AoA! Dear brother I wanted to ask that if any rom developed for micromax a110 would work on qmobile noir a10 which I believe are same.I was willing to install Suvi rom v7 but am afraid of bricking my noir a10
    Please guide.thanks
    Also if there are great chances of bricking my phone if I flash a custom rom.

    ReplyDelete
  42. it will work dont wory just make a backup before trying any other rom thanks

    ReplyDelete
  43. i will not consider updating using flashtool...btw it is 4.1.2

    ReplyDelete
  44. thanks Saad , let me check it

    ReplyDelete
  45. Assalam.o.alikum dear brother, I am using Q Mobile Noir Note A11. Can i Install it on my phone???

    ReplyDelete
  46. no u can't... follow these step if u want to port this rom to ur phone http://www.androidspakistan.com/2013/05/port-any-custom-rom-for-your-android.html

    ReplyDelete
  47. One of the best and stable ROM I have been used till now, I am using it on daily basis and tweaking it more and more , rarely I see any hiccups on it unless I load something very heavy for this gigantic phone miserable RAM offered by Q Mobile people.


    Hafiz Usama Amjad is a wonderful young man doing great job in putting so many efforts to bring such a wonderful stable ROM for all of us using Q A10. I hope he is working on this ROM and bring us an updated version with more tweaks and stable apps on it .

    ReplyDelete
  48. Great information dear. More stuff about Qmobile Noir A10 Review to share

    ReplyDelete
  49. Why is it now showing Jelly Bean under BUILD NUMBER ?

    ReplyDelete
  50. hi would the compass working in this ROM i have noir a10

    ReplyDelete
  51. it has a bugg lock screen error " launcher has stopped what should i do now i am stuck

    ReplyDelete
  52. i install this stupid room didnt have backup to now i want to reinstall Lewa_A8_INCPak.com_v1 how would i do that

    ReplyDelete
  53. a-o-a sir my heandset noir a10 .4.1.1 (jb) but not rooted ??? 5037 not running .. telme plz

    ReplyDelete
  54. kia root k elawa set my rom install ho sakta hy ?? or mary pass Q a10 hy us may jelly bean 4.1.1 install hy per wo root nahi horha plz help me

    ReplyDelete
  55. a.o.a bhai qmobile ka koi be set rooted karne ke lie ye soft sab se best hai
    download
    kingo-root and install and connect your mobile with pc andlaunch the
    kingo-root software and w8 till the software install the mobile driver
    after installed you just simply click root and w8 :)
    apko driver install hone ke duran mobile plug unplug karna pare ga jab soft kahe tab otherwise nahi

    ReplyDelete
  56. can anyone provide me with Qmobile A10 backup pls???

    ReplyDelete